Gas Diffusers for Induction Furnaces

Capital Refractories supplies gas diffusers for use in induction furnaces in a range of qualities, sizes and fittings.

Our gas diffusers complement our range of dry rammed linings, that can be operated continuously or intermittently, and are designed to last the life of the lining.

The standard range for induction furnaces is made with Caperdiff 94 AL (a high alumina quality) and stainless steel cans and are usually available from stock (except IF 6).

Product Range

Product Name Product Description
Caperdiff 94AL Pressed and fired permeable alumina diffuser for both ferrous and non-ferrous application. A high strength product where mechanical damage (cleaning) may be an issue, together with a low pore size to give a finely dispersed bubble swarm.
Caprax ASF DP A low cement, alumina-mag spinel directional or channel porosity diffuser, for application in steel ladles where there is an aggressive slag environment.

To avoid confusion it is recommended to include the drawing number on any order.
The quality of the plug depends on the application.

Gas Diffusers for Induction Furnaces

Gas Diffuser Model Gas Diffuser Model Lining Thickness Lining Thickness
Name* Drawing No. (mm) (inch)
MINI 7204 < 75 < 3
IF 1.5 7220 < 75 < 3
IF 2 7205 < 75 < 3
IF 3 7206 100 - 150 4 - 6
IF 4 7207 150 - 200 6 - 8
IF 5 7217 200 - 250 8 - 10
IF 6 7228 > 250 > 10

* The name: IF refers to induction furnace and the number is the nominal size in inches.

Duplex Gas Diffusers for Induction Furnaces

Gas Diffuser Model Gas Diffuser Model Lining Thickness Lining Thickness
Name* Drawing No. (mm) (inch)
IF 2 7235 75 - 100 3 - 4
IF 3 7236 100 - 150 4 - 6
IF 4 7237 150 - 200 6 - 8

Brochure Request

Thank you

Your brochure is ready for download.

Download brochure