Coreless Induction Furnace Linings

Capital manufactures an extensive range of linings including spinel and mullite forming products. These have been specifically developed for a variety of metals and some allow for a mixed melting programme. The furnace lining products are complemented by a complete range of toppings, spout, repair, and patching materials.

Key Benefits:

  • Capital is at the forefront of technologically innovative induction furnace lining solutions
  • We are a leading company in terms of the quality and performance of our products
  • Our superior and comprehensive product ranges are backed by effective service and technical support
  • Capital has a process of continual development to advance the performance of existing products and to introduce new ones

Product Range

Dry Rammed Lining

Capital Refractories offer a full range of coreless induction furnace linings, topping and patching products for a wide range of steels and high temperature alloys.

Topping and Spout Material

A range of chemically bonded high strength materials compatible with Capital’s dry linings.

Coil Screed

High grade fine hydraulic cements.

Slip Plane Material (Micanite/Mica)

The slip plane is positioned against the coil screed to provide a smooth surface. This is essential for uninhibited reversible movement of the refractory lining caused by its thermal expansion and contraction. The mica also offers a degree of protection against metal penetration.

Mica Mesh

A sandwich of metal mesh between two layers of mica is available which is used in systems that give early warning of metal penetration through a lining.

Repair Material for Lids/Bases

Fine grained chemically bonded products for lining repairs and joint sealing.

Dry Rammed Lining

PRODUCT NAME PRODUCT DESCRIPTION BOND MAX SERVICE TEMPERATURE (°C)
Coral Vac High duty lining developed to withstand prolonged elevated temperatures and retain a good level of powder at the back face. Ceramic 1720* 1750†
Coral SXL High duty lining developed to withstand elevated temperatures and retain a good level of powder at the back face. Ceramic 1700* 1750†
Coral CXL General purpose lining with a wide melting temperature range. Ceramic 1700* 1730†
Coral HB Tough general purpose lining. Ceramic 1680* 1720†
Coral SMC Incorporates complex chromes for improved slag resistance. Ceramic 1700* 1750†
Coral 85 High performance lining designed for large furnaces operating at high temperatures. Ceramic 1700* 1750†
Coral GR9 A dense dry spinel forming ramming mix, based on fused alumina. Ceramic 1700* 1760†
Coral NGB A dense dry spinel-forming ramming mix, based on fused alumina. Ceramic 1750* 1800†

Topping and Spout Material

PRODUCT NAME PRODUCT DESCRIPTION BOND MAX SERVICE TEMPERATURE (°C)
Almacap Silicate bonded high alumina hard wearing rammable. Chemical 1650
Capram 70 Phosphate bonded high alumina plastic topping and repair mix. Chemical 1700
Capram 80 C5 Chemically bonded chrome enriched alumina silicate plastic. Chemical 1700
Capram 90 Chemically bonded high alumina plastic. Chemical 1800
Capram 85 Chemically bonded high strength high alumina refractory ramming mix. Chemical 1800
Coral Cap A dense, dry spinel forming ramming mix. Ceramic 1700
WS 90 Rammable Chemically bonded high alumina ramming mix. Chemical 1800

Coil Screed

PRODUCT NAME PRODUCT DESCRIPTION MAX.GRAIN SIZE (mm) BOND MAX SERVICE TEMPERATURE (°C)
Silkote 90 Hydraulically bonded, high alumina induction furnace coil screed. 1 Hydraulic 1700
Capscreed Hydraulically bonded, high alumina induction furnace coil screed. 1 Hydraulic 1680
Capgrout G Hydraulically bonded, high alumina, induction furnace coil grout (mudding/screed) material. 1 Hydraulic 1700

Slip Plane Material

PRODUCT NAME LENGTH (m) WIDTH (m) THICKNESS (mm) FORM
Mica Sheet 1.2 /1.8 / 2.2 1.0 0.4 sheet
Mica Roll 12.5 1.0 0.3 roll
Mica Glass 20.0 1.0 0.4 roll
Combi-Roll 12.5 1.0 2.0 roll
Mica Foil 20.0 1.0 0.4 roll
Mica Weave 20.0 1.0 0.28 roll

Repair Materials

PRODUCT NAME PRODUCT DESCRIPTION BOND MAX SERVICE TEMPERATURE (°C)
D10 Plaster Aluminosilicate patching plaster. Chemical 1700
D10F A finer version of D10 Plaster. Chemical 1700
D11 High grade high alumina patching material. Chemical 1800
Capram 90F High grade high alumina patching and topping material. Chemical 1800
Capram 90LP High Performance chemically bonded, high alumina, plastic/plaster. Chemical 1800

*           Normal maximum operating temperature
†          Short term maximum operating temperature.

Brochure Request

Thank you

Your brochure is ready for download.

Download brochure