| Hot face dry rammed lining | A range of linings including spinel or mullite forming, specifically developed for melting a variety of metals, some allowing a mixed melting programme. |  |
| Topping & Spout Material | Chemically bonded high strength materials compatible with Capital's dry linings. | |
| Coil Screed | High grade fine hydraulic cements | |
| Slip Plane Material | Mica in sheet or roll form | |
| Repair Materials | Fine grained chemically bonded products for lining repairs and joint sealing. | |
| Castable Material for Lids/Bases | Hydraulically bonded multi-purpose castable. |
Note that the image below is intended as comparative guide only and does specify absolute or guaranteed ranges that the linings will operate. The actual range is dependent on many factors including melt practice, holding time, alloy, etc...
 |
Hot face dry rammed lining
| Product Name | Product Description | Bond |
Max service |
Coral Vac |
High duty lining developed to withstand prolonged elevated temperatures and retain a good level of powder at the back face. | Ceramic | 1720* |
Coral SXL |
High duty lining developed to withstand elevated temperatures and retain a good level of powder at the back face. | Ceramic | 1700* |
Coral XL |
General purpose lining with a wide melting temperature range. | Ceramic | 1700* |
Coral CXL |
General purpose lining with a wide melting temperature range. | Ceramic | 1700* |
Coral HB |
Tough general purpose lining. | Ceramic | 1680* |
Coral FG |
Tough lower temperature lining for manganese and stainless steels. | Ceramic | 1680* |
Coral SMC |
Incorporates complex chromes for improved slag resistance. | Ceramic | 1700* |
| Coral 85 | High performance lining designed for large furnaces operating at high temperatures. | Ceramic | 1700* |
Coral V40 |
Magnesia-rich lining designed for vacuum melting. | Ceramic | 1750* |
Cormag 90 |
Basic ramming mix for use in continuous melting applications. | Ceramic | 1750 |
Topping & Spout Material
| Product Name | Product Description | Bond |
Max service |
Almacap |
Silicate bonded high alumina hard wearing rammable. | Chemical | 1650 |
Capram 70 |
Phosphate bonded high alumina plastic topping and repair mix | Chemical | 1700 |
Toppatch |
Silicate bonded alumino-silicate rammable. | Chemical | 1600 |
| Coral V40 DT | Dry topping for Coral V40. | Ceramic | 1750 |
Coil Screed & Slip Plane Material
| Product Name | Product Description | Bond |
Max service |
Silkote 90 |
Hydraulically bonded, high alumina induction furnace coil screed. | Hydraulic | 1700 |
Capscreed |
Hydraulically bonded, high alumina induction furnace coil screed. | Hydraulic | 1680 |
Repair Materials
| Product Name | Product Description | Bond |
Max service |
D10 Plaster |
Alumino-silicate patching plaster. | Chemical | 1700 |
D10F |
A finer version of D10 Plaster. | Chemical | 1700 |
D11 |
High grade high alumina patching material. | Chemical | 1800 |
| Capram 90F | High grade high alumina patching and topping material. | Chemical | 1800 |
Castable Material for Lids/Bases
| Product Name | Product Description | Bond |
Max service |
Silcast 1600 CM |
Alumino-silicate multi-purpose castable. | Hydraulic | 1600 |