English 汉语 Français
 

 

Coreless Induction Furnace Linings
>Copper

 

 

Capital Refractories offer a full range of coreless induction furnace lining, topping and patching products for a wide range of copper, bronze and other copper alloys.

 

Hot face dry rammed lining A range of linings including spinel or mullite forming, specifically developed for melting a variety of metals, some allowing a mixed melting programme.
Topping & Spout Material Chemically bonded high strength materials compatible with Capital's dry linings.
Coil Screed High grade fine hydraulic cements
Slip Plane Material Mica in sheet or roll form
Repair Materials Fine grained chemically bonded products for lining repairs and joint sealing.
Castable Material for Lids/Bases Hydraulically bonded multi-purpose castable.

 

Hot face dry rammed lining

Product Name Product Description

Bond

Max service
temp.
/ °C

CRL65 Mullite forming material with excellent resistance to chemical, thermal and mechanical damage. Ceramic

1650*
1700

C65 RFL As CRL 65 with a low temperature bonding system for fritting with a removable former. Ceramic

1600

Silica 1 grade
Acid lining based on natural quartz with a  1% boric acid addition.
Ceramic

1620

Silica 17 grade
Acid lining based on natural quartz with a 1.7% boric acid addition.
Ceramic

1580

 

Topping & Spout Material

Product Name Product Description

Bond

Max service
temp.
/ °C

Capram 60
Phosphate bonded high alumina zircon enriched plastic and repair mix
Chemical

1650

Capram 85
Silicate bonded alumino-silicate topping mix.
Ceramic

1600

 

Coil Screed & Slip Plane Material

Product Name Product Description

Max.
Grain
Size
/ mm

Bond

Max service
temp.
/ °C

Silkote 90

Hydraulically bonded, high alumina induction furnace coil screed.
1 Hydraulic

1700

Capscreed

Hydraulically bonded, high alumina induction furnace coil screed.
1 Hydraulic

1680

 

Repair Materials

Product Name Product Description

Bond

Max service
temp.
/ °C

D10 Plaster

Alumino-silicate patching plaster.
Chemical

1700

D10F

A finer version of D10 Plaster.
Chemical

1700

D11

High grade high alumina patching material.
Chemical

1800

 

Castable Material for Lids/Bases

Product Name Product Description

Bond

Max service
temp.
/ °C

Silcast 1600 CM

Alumino-silicate multi-purpose castable.
Hydraulic

1600