Step 1
The Empty Furnace.
Step 2
Position the mica slip-plane.
Step 3
Tape the mica into position.
Step 4
Pour in the lining for the base and vibrate.
Step 5
Measure Depth.
Step 6
Trim the spider wire.
Step 7
Ensure the former is clean.
Step 8
Position the former level and secure.
Step 9
Pour in the lining to just above the chamfer.
Step 10
Spike the lining.
Step 11
Top up the lining material around the chamfer.
Step 12
Vibrate the lining around the chamfer.
Step 13
Top up the Lining.
Step 14
Vibrate the lining using the <br>internal vibrator and top up.
Step 15
Vibrate.
Step 16
Complete the vibration, reducing power at the top.
Step 17
Spike the lining top.
Step 18
Add the topping and spike into the lining.
Step 19
Ram the lining in.
Step 20
Put holes in the topping to release steam during sintering.
Step 21
Finished.