 1 - The Empty Furnace |
 2 - Position the mica slip-plane |
 3 - Tape the mica into position |
 4 -Pour in the lining for the base, level and vibrate. |
 5 - Measure depth |
 6 - Trim the spider wire |
 7 - Ensure the former is clean |
 8 - Position the former. Level and secure. |
 9 - Pour in the lining to just above the chamfer |
 10 - Spike the lining |
 11 - Top up the lining material around the chamfer |
 12 - Vibrate the lining around the chamfer |
 13 - Top up the lining |
 14 - Vibrate the lining using the internal vibrator and top up |
 15 - Vibrate |
 16 - Complete the vibration, reducing power at the top |
 17 - Spike the lining top |
 18 - Add the topping and spike into the lining |
 19 - Ram the lining in |
 20 - Shape the spout |
 21 - Put holes in the topping to release steam during sintering |
22 - Complete! |
Step-by-Step Guide
Below is a sequence of photographs showing a typical installation of a dry vibration rammable into a small coreless induction furnace.